page contents
Browse Categories
Mailing Lists
Shopping Cart
Your cart is empty.

ALUMINUM FLAGPOLES

Our cone tapered ground set aluminum flagpoles are precision fabricated from new, 6063-T6 tubing utilizing the industry’s most sophisticated, state-of-the-art manufacturing processes. The conical portion tapers approximately 1” in every 51/2 feet. Poles with overall lengths of less than 38’6” are shipped in one piece. Longer lengths are shipped in sections and will be factory fitted with a self-aligning sleeve which requires no field welding. Upon proper assembly a hair-line joint will occur. All poles are double spiral wrapped with protective paper and shipped in a hard fiber tube. “Warning” - The flagpole shaft will stain if allowed to remain in contact with wet or damp wrappings. If there is any sign that the shaft or its shipping tube has come in contact with water during shipment, remove it from the tube and unwrap immediately. If the shaft is to be stored outdoors, it must be stored unwrapped, and off the ground. If the shaft is to be stored indoors, it may be left in the wrappings and the tube, provided that it shows no sign of having been exposed to moisture, and that it will not be exposed to moisture during storage. All foundation dimensions listed in this catalog are intended for general guidelines only in good, firm, dry soil. It is recommended to consult and engineer for specific foundation dimensions suited to your exact location. “Warning” - Extreme care must be exercised when installing flagpoles near overhead power lines or when digging in the vicinity of buried cable or piping. Contact your local authorities before any digging. STANDARD FINISHES FOR FLAGPOLES , SATIN, CLEAR, BRONZE, BLACK
Economy Extra
Flagpole Economy Extra Series , 20 ft to 70 ft above ground height. Made in the USA. See chart for wind speed ratings. Call for truck shipping costs quote.
Atlas Series
Flagpole Atlas Series Aluminum Flagpoles 20 ft to 60 ft are rated for stronger wind speeds up to 175 mph. Call for truck shipping costs quote.
Architectural Series
Top of the Line External Halyard Flagpole. Sizes 20 ft to 80 ft. Made in the USA. Call for trucking shipping cost quote.
Vanguard Series
Internal Halyard Vanguard Series Flagpoles with Clam Cleat.
Displaying products 1 - 4 of 4 results
Architectural Deluxe Internal Halyard Flagpole 20 FT .125 Wall
Discounted Price: From $1,738.00 to $2,126.00
Architectural Deluxe Internal Halyard Flagpole 20 FT .125 Wall
Above Ground Length: 20' Below Grade: 3' Butt Diameter:5" Top Diameter:3" Wall Thickness:0.125 Suggested Flag Size:3" x 5" Max Windspeed (Flagged):144 MPH Max Windspeed (Unflagged):250 MPH
Architectural Deluxe Internal Halyard Flagpole 20 ft .188 Wall
Discounted Price: From $1,895.00 to $2,426.00
Architectural Deluxe Internal Halyard Flagpole 20 ft  .188 Wall
Butt Diameter:5" Top Diameter:3" Wall Thickness:0.188 Suggested Flag Size:3" x 5" Max Windspeed (Flagged):120 MPH Max Windspeed (Unflagged):315 MPH LIFETIME SHAFT WARRANTY
Architectural Internal Halyard Deluxe Flagpole 25 ft
List Price: $4,910.00
Discounted Price: $2,995.00
You Save: $1,915.00 (39 %)
Architectural Internal Halyard Deluxe Flagpole 25 ft
Architectural Aluminum Internal Halyard Flagpoles 25 ft Model EC25IH , Lifetime shaft warranty, call for trucking company freight quote Phone 800-669-9639 or email us at sales@flagamerican.com, Also. we can email spec sheet and install instructions
Flagpoles Architectural Series $ 845.00
Flagpoles Architectural Series
Discounted Price: $1,364.00
Flagpoles Architectural Series
Our Architectural Series aluminum flagpole has a very high wind speed rating is suitable for use on the coastal lines. . Available in satin finish and optional Clear, Bronze, Black anodized. Call for truck ship cost quote. Phone 800-669-9639,
 
Shopping Cart
Your cart is empty.